TG Telegram Group Link
Channel: Civil engineering quiz
Back to Bottom
Which one of the following type of ecology deals with autecology?
Anonymous Quiz
16%
Synecology
17%
Community ecology
41%
Ecosystem ecology
27%
Individual species ecology
In slope correction if higher power is not neglected, then the correction increases by
Anonymous Quiz
43%
(h^2)/(2L)
21%
(h^3)/(4L^2)
35%
(h^4)/(8L^3)
1%
(h^5)/(16L^4)
👇Comment your answers below👇
The value of MSL at datum is obtained by averaging the elevations of high and low tides for a period of ______years wrt ____port in India.
Anonymous Quiz
42%
19, Bombay
40%
35, Bombay
15%
25, Vishakapatnam
4%
35, Chennai
How many types of levelling are there ?
Anonymous Quiz
32%
2
23%
3
23%
4
21%
5
In case of columns of minimum dimension of 200mm or under, whose reinforcing bars do not exceed 12mm, a nominal cover may be provided
Anonymous Quiz
31%
40mm
50%
25mm
15%
20mm
4%
50mm
Lateral ties in RCC columns are provided to resist
Anonymous Quiz
8%
Bending moment
14%
Shear
64%
Buckling of longitudinal bars
13%
Both bending moment and shear
For the purpose of design of reinforced concrete footing, pressure distribution is assumed to be
Anonymous Quiz
38%
Linear
42%
Parabolic
15%
Hyperbolic
4%
None of the above
In an axially loaded spirally reinforced short column , the concrete inside the core is subjected to
Anonymous Quiz
36%
Bending and compression
29%
Biaxial compression
34%
Triaxial compression
1%
None of the above
A reinforced concrete column with slenderness ratio greater than 12 is classified as
Anonymous Quiz
13%
Short column
72%
Long column
14%
Axially loaded column
0%
Stub column
Which of the following range of pigment volume concentration number is recommended for paint for prime coat on metal
Anonymous Quiz
40%
25--40
39%
40--50
17%
50--60
4%
60--70
Which of the following indian standard is referred to determine zone of fine aggregate?
Anonymous Quiz
18%
IS 456
55%
IS 383
23%
IS 893
4%
IS 1237
The point on celestial sphere vertically below observations position is called
Anonymous Quiz
4%
Pole
31%
Celestial point
33%
Zenith
31%
Nadir
As per IS Code provision the tolerance on placing of reinforcements in a structural member having effective depth more than 200mm shall be
Anonymous Quiz
20%
+ - 25mm
34%
+ - 20mm
33%
+ - 15mm
12%
+ - 10mm
A prismatic beam of uniform flexural rigidity EI is simply supported over a span,L. If a moment M is applied at one support , the resulting bending strain energy is
Anonymous Quiz
21%
ML2/EI
42%
M2L/2EI
25%
M2L/4EI
12%
M2L/6EI
Media is too big
VIEW IN TELEGRAM
How a dam is constructed. Full detail animated video explaination
HTML Embed Code:
2024/06/16 18:29:15
Back to Top